Galaxy MaxHz¹

Refresh Rate Mods

• Change default refresh rates of devices supporting multiple refresh rates.

  • Set supported mid refresh rates as the maximum refresh rate limit for battery savings.
  • Configure separately for Power Saving Mode and Low Battery State, as well as for the main and outer screens on supported foldables [premium]

• Refresh rate mode switcher(Normal, Adaptive or High)²

  • Set you device motion smoothness mode to stationary refresh rates (high mode) for better smoothness if so desired.
  • Adaptive refresh rate mod on devices that don't natively support adaptive refresh rate mode ²

• Per-app refresh rate settings[premium]:

  • Assign adaptive or static refresh rates per app.
  • Configure individually for main screen and outer screens on supported foldables.

• Refresh rate monitor

• Prevent switching to Standard mode on power saving mode [premium]

  • Prevent system from switching to Standard mode when power saving mode is enabled

  • Enforce CPU speed limit on Power Saving Mode even with Adaptive/High mode (OneUI7+)

  • GMH will automatically apply a workaround to bypass 60Hz limitation on Power Saving Mode (PSM) on supported devices.

    Devices with OneUI5/OneUI6 and those few with OneUI4.* require extra steps, except when rooted and using the Xposed/LSPosed module.

• Screen off/AOD refresh rate

  • Force the lowest supported refresh rate on screen-off or Always-On Display(AOD) to improve standby power consumption a bit.

Screen-off Mods:

• Auto power saving mode on screen-off²

  • Auto enable power saving mode when the screen is off, and disable it when the screen turns back on.

• Auto disable Autosync

  • Auto disable Autosync when the screen is off, and disable it when the screen turns back on

• Quick-doze mod²

  • Quickly enter doze mode to improve standby drain with customizable maintenance interval [premium]
  • Remove apps from Doze system whitelist to allow system to restrict or optimize their background/standby usage.

• Auto SENSORS OFF (Supports up to OneUI4 only)

Extras

• Battery protection mod² (for OneUI4+)

  • Option to suspend charging by thermal thresholds
  • Option to customize charge limit and recharge level
  • Pass-through mode (battery by-pass) with customizable threshold on supported models.
  • Set schedules for charge limits and/or pass-through.

• Animation mod²

  • Easily adjust animation duration and scale

• Keep force resizable activites²

• Quick resolution switcher²

  • Easily switch to any supported resolutions using the included quick setting tile

• Statusbar net speed indicator

  • Quick settings toggle ²

Integrations

• Tasker
• App shortcuts

Note for modified ROM users: The app may or may not work depending on app's dependencies modified. Tweaks that modify the device model number in the build prop (ro.product.vendor.model) will cause bugs on the app including the license verification. Also, do not restore app from backup, always fresh install.

Info: This app targets older android sdk in order to control refresh rates without ADB setup or root. Just tap OK the dialog that says "This app was built for an older version of Android...." when opened for the first time. If OK button is not visible, just tap the blank space on the lowest portion of the dialog.

Only Samsung devices are officially supported. Features may or may not work on other devices.

Installation instructions for OneUI6.0 (Android14) and above

Contact developer

IMPORTANT: How to install on devices with One UI 6 (Android 14) or higher

Download links:

v9.0.91

v9.0.91x(with built-in 60hz bypass xposed module for rooted oneui6.1 and below)

v9.0.91-v7a(for older 32-bit only devices)

Changelog:

• Protect Battery

  • Added suspend charge by thermal
  • Added recharge level with 2 modes
  • Separate thresholds for pass-through charging (for both default and schedules)
  • Updated notification indicators/icons
  • Option to auto-re-enable when unplugged
  • Added battery info including battery health and charge-cycle info [^1]

• Quick Doze mod

  • Remove apps from the system Doze whitelist [^1]
  • View recent Doze history [^1]
  • Separate switch toggle for no maintenance window
  • Other adjustments

• Animation mod

  • Split controls for finer tuning

• Refresh rates mod

  • Separate refresh rate mode (aka Motion Smoothness) settings for outer and inner displays on supported foldables

• Integrations & Shortcuts

  • Tasker plugins and shortcuts redesigned for easier use with new settings added (breaking change for older setups)
  • Added app shortcuts to common toggles

• Fixed crashes triggered by Quick Settings shortcuts

• App updates can now be installed directly via Shizuku on devices with One UI 6+ [^1]

• Redesigned UI (SESL8/OneUI8 inspired)

• General app optimizations

There maybe a few more

[^1] : Requires Shizuku or root